By heating water only as
it is needed our Tankless Water Heater eliminates
the need for bulky water heaters that heat water continuously.
This can reduce hot water costs up to 60% over conventional
electric water heaters. TheTankless Water Heater's
high efficiency is in part due to its dedicated analog
microprocessor that samples input and output temperatures
21 times per second.
This power control system
analyzes the data and manages power usage for maximum
efficiency and temperature stability. At rest, the
Tankless Water Heater uses no power at all.
Available in seven models,
our Tanless Water Heaters are ideal for a wide range
of application. One single unit can supply the hot
water needs of your home, condo or apartment.. Electricty
savings in some applications can pay back unit cost
in less than one year.
Due to its shielded incoloy
heating elements and copper & brass casing, our
Tankless Water Heaters are ideal in any application
where mineral deposits shorten the life of a conventional
water heater.
Our Tankless Water Heaters
come with a 15 year warranty on all water-carrying
components and all other parts are warrantied for
one year. Installation is quick and easy, requiring
no venting or pressure relief valves, and the compact
size allows installation almost anywhere. Our Heaters
without a doubt are the Tankless Water Heaters for
the 21st century.
|
Specifications
|
| Pipe
Fitting |
1/2" Standard
Pipe |
| Pressure
Requirements |
5 PSI-Min./150 PSI-Max |
| Voltage |
220 VAC Std.(208/277
Avail.) |
| Elements |
Dual Incoloy/Nichrome |
| Energy
Efficiency |
Up to 99.5% |
| Activation |
0.4 GPM-on/).3 GPM-off |
| Indicators |
Red-on/Amber-stand
by |
| Warranty |
15 years on casing
1 year on components |
| Protection
|
Dual Microtemp Thermofuse
- Manual Resetable Thermostat |
U.S. Patent # 5,408,578
Note
that the KW and Amps are controlled by the setting
on the Power Mode.
Check specifications on
unit used. Voltage, amperage, breaker and wire may
vary depending on local electrical standards. Consult
a professional plumber and electrician for guidance.
The electrical specifications
are based on 220 volts. It should be noted that higher
voltage will increase power, just as lower voltage
will have the reverse effect. The (POWER MODE CONTROL)
can be adjusted to compensate allowing the user to
increase or decrease water temperature. For best performance
adjust temperature at MEDIUM FLOW (approximately 1
GPM) this is the average water flow at any faucet
with an aerator.
Remember, that any adjustments
made on your unit will take seconds to reach point
of use. DO NOT OVER HEAT WATER. Water temperature
from 105F to 120F is adequate for all practical purposes
|
MODELS
|
|
Model
|
Max KW at 220V
|
Volts
|
Max Amps at 220V
|
Gallons per minute
|
Applications
|
|
N-120
|
11.8KW
|
220V
|
54
|
2.5
|
Entire
house - 2 baths, dishwasher, washing machine |
|
N-100
|
10.8KW
|
220V
|
49
|
2
|
Condo/Apartment
– 2 baths, kitchen, washing machine |
|
N-85
|
8.5KW
|
220V
|
38
|
1.75
|
Small
Condo/Apartment – 1 bath, kitchen |
|
N-75
|
7.5KW
|
220V
|
34
|
1.5
|
Small
Condo/Apartment – 1 bath |
|
N-64
|
6.4KW
|
220V
|
29
|
1.35
|
Single
Appliance –Dishwasher or Washing machine or Bathroom
or faucet |
|
N-42
|
4.2KW
|
220V
|
19
|
1.2
|
Single
faucet |
|
N-10
|
3.2KW
|
110V
|
29*
|
1
|
Single
faucet -Warm water only |
* N-10 uses 110 volts and will supply
only warm water
.In areas with cold weather we recommend to use the
highest model.
USES
• House •
Apartments • Condominiums • Beauty Salons
• Hospitals • Boats • Laboratories
• Campers • Offices
• Schools • Cottages • Restaurants
• Barber Shops • Warehouses • Anywhere
hot water is needed.
Click
here for the Frequently Asked Questions about this
product
Hot Water Energy Conservation
Heating water accounts for
up to 25% of the average household energy. A leak
of one drip per second can cost you $1.00 per month,
2 drips $2.00 and so on... Installing aerators in
faucets and low flow shower heads can save a significant
amount of hot water.
Demand Water Heaters
One way to save on domestic hot water bills is to
use (DEMAND TYPE WATER HEATER). A conventional hot
water system heats water in a tank to a specified
temperature. As heat is lost from the tank, the water
is reheated until it reaches the specified temperature
again. For most of the day the water in the tank is
not used, but it loses heat continually. DEMAND WATER
HEATERS Eliminate this problem by heating water only
as hot water is drawn.
|
Avg./gal.
hot water per/usage
|
| Shower |
20
|
| Bath |
20
|
| Hands
and face washing |
4
|
| Shaving |
2
|
| Hair
shampoo |
4
|
| Hand
dishwashing |
4
|
| Automatic
dishwashing |
14
|
| Food
preparation |
5
|
| Automatic
clothes washer |
32
|
Facts:
A 30 or 40 gallon hot water heater tank will supply
only enough hot water for one or two showers before
running out of hot water! Not with Titan Electronic
Tankless Water Heater!
IT IS EASY TO SEE WHY CONVENTIONAL WATER HEATERS ARE
NO LONGER ECONOMICAL OR PRACTICAL... They consume
electricity to heat water that is not being used,
a process that repeats itself over and over even though
no hot water is needed.
Our Electronic Instant Water Heaters provide hot water
ONLY when you need it, without the costly reheating
process. An electronic component monitors the temperature
of the water at different flow rates and maintains
a pre-set temperature, allowing the use of conventional
or single handle faucets.
We reserve the right to
amend specifications as new technology develops.
|
